Открытый доступ Открытый доступ  Ограниченный доступ Доступ для подписчиков

Влияние покрытий из карбида хрома Cr3C2 и Ni - Cr-сплава, полученных детонационным напылением, на эксплуатационные свойства зубчатых шестерен из серого чугуна

М. Канта Шоба, К. Малар Мохан, П. Правин Радж

Аннотация


Исследованы структура, твердость и износостойкость серого чугуна с покрытиями из карбида хрома Cr3C2 и Ni - Cr-сплава, нанесенными методом детонационного напыления. Покрытие из Cr3C2 имеет более прочное сцепление с подложкой из серого чугуна и обеспечивает более высокие твердость и износостойкость по сравнению с покрытием из Ni - Cr.

Ключевые слова


серый чугун; покрытие; детонационное напыление; твердость; износостойкость; микроструктура

Полный текст:

PDF

Литература


Yua J., Song B., Liu Y. Microstructure and wear behaviour of Ni-based alloy coated onto grey cast iron using a multi-step induction cladding process // Results Phys. 2018. V. 10. P. 339 - 345.

Gao J., Tang Z., Wang C. et al. Microstructure, mechanical and oxidation characteristics of detonation gun and HVOF sprayed MCrAlYX coatings // Trans. Nonferrous Met. Soc. 2015. V. 25. P. 817 - 823.

Zulhishamuddin A. R., Aqida S. N., Mohd Rashidi M. A.Comparative study on wear behaviour of Cr/Mo surface modified grey cast iron // Opt. Laser Technol. 2018. V. 104. P. 164 - 169.

El-Sawy E. E. T., El-Hebeary M. R., El-Mahallawi I. S. E. Effect of manganese, silicon and chromium additions on microstructure and wear characteristics of grey cast iron for sugar industries applications // Wear. 2017. V. 390 - 391. P. 113 - 124.

Zhao N., Zhao Y., Wei Y. et al. Friction and wear behavior of TaC ceramic layer formed in-situ on the gray cast iron // Tribol.Int. 2019. V. 135. P. 181 - 188.

Park Il-C., Kim S.-J. Effect of lead nitrate concentration on electroless nickel plating characteristics of gray cast iron // Surf. Coat. Technol. 2018. V. 376. P. 2 - 7.

Sathish S., Geetha M.Comparative study on corrosion behaviuor of plasma sprayed Al2O3, ZrO2, Al2O3 /ZrO2 and ZrO2 /Al2O3 coatings // Trans. Nonferr. Met. Soc. of China. 2016. V. 26. P. 1336 - 1344.

La Barbera-Sosa J. G., Santana Y. Y., Moreno E. et al. Effect of spraying distance on the microstructure and mechanical properties of a Colmonoy 88 alloy deposited by HVOF thermal spraying // Surf. Coat. Technol. 2010. V. 205. P. 1799 - 1806.

Jiang Y., Xu B.-S., Wang H.-D. Sources and failure modes of residual stresses in thermal sprayed coatings // Heat Treat. Met. 2007. V. 32. Is. 1. P. 25 - 27.

Abdou S., Elkaseer A., Kouta H. et al. Wear behaviour of grey cast iron with the presence of copper addition // Adv. Mech. Eng. 2018. V. 10, Is. 10. P. 1 - 8.

Ichikawa Y., Ogawa K. Critical deposition condition of CoNiCrAlY cold spray based on particle deformation behavior //j. Therm. Spray Tech. 2017. V. 26. P. 340 - 349.

Agunsoye J. O., Isaac T. S., Awe O. I. et al. Effect of silicon additions on the wear properties of grey cast iron // JMMCE. 2013. V. 1. P. 61 - 67.

Kašparova M., Houdkovб S., Zahalk F. Adhesive-cohesive strength of Cr3C2 - NiCr HVOF sprayed coatings // Chemicke Listy. 2010. V. 104. P. s326 - s329.

Matthews S., Asadov A., Ruddell S. et al. Thermally induced metallurgical processes in Cr3C2 - NiCr thermal spray coatings as a function of carbide dissolution //j. Alloy Comp. 2017. V. 728. P. 445 - 463.

Matthews S., Hyland M., James B. Microhardness variation in relation to carbide development in heat treated Cr3C2 - NiCr thermal spray coatings // Acta Mater. 2003. V. 51, Is. 14. P. 4267 - 4277.

Li C.-J., Ji G.-C., Wang Y.-Y. et al. Dominant effect of carbide rebounding on the carbon loss during high velocity oxy-fuel spraying of Cr3C2 - NiCr // Thin Solid Films. 2002. V. 419. P. 137 - 143.

Da Cunha C. A., de Lima N. B., Martinelli J. R. et al. Microstructure and mechanical properties of thermal sprayed nanostructured Cr(3)C(2) - Ni20Cr coatings // Mat. Res. 2008. V. 11. P. 137 - 143.

Popov V. L., Pohrt R. Adhesive wear and particle emission: Numerical approach based on asperity-free formulation of Rabinowicz criterion // Friction. 2018. V. 6, Is. 3. P. 260 - 273.

Murthy J. K. N., Bysakh S., Gopinath K. et al. Microstructure dependent erosion in Cr3C2 - 20(NiCr) coating deposited by a detonation gun // Surf. Coat. Technol. 2007. V. 202, Is. 1. P. 1 - 12.

Hong S., Wu Y., Wang Q. et al. Microstructure and cavitation- silt erosion behavior of high-velocity oxygen-fuel (HVOF) sprayed Cr3C2 - NiCr coating // Surf. Coat. Technol. 2013. V. 225. P. 85 - 91.

Venkatraman M., Neumann J. P. The C - Cr (carbon-chromium) system // Bull. Alloy Phase Diagrams. 1990. V. 11, Is. 2. P. 152 - 159.

Velikanova T. Y., Bondar A. A., Grytsiv A. V. The chromium- nickel-carbon (Cr - Ni - C) phase diagram //j. Phase Equilib. 1999. V. 20, Is. 2. P. 676 - 681.

Demir A., Samur R., Kilicaslan I. Investigation of the coatings applied onto brake discs on disc-brake pad pair // Metalurgija. 2009. V. 48. P. 161 - 166.

Samur R., Demir A. Wear and corrosion performances of new friction materials for automotive industry // Metalurgija. 2012. V. 51. P. 94 - 96.

Azad A., Priyan M. S., Araffath S. Y. Influence of HVOF parameters on the wear resistance of Cr3C2 - NiCr coating // JMSSE. 2016. V. 4, Is. 2. P. 355 - 359.




DOI: https://doi.org/10.30906/mitom.2022.1.50-54

© Издательский дом «Фолиум», 1998–2024