Открытый доступ Открытый доступ  Ограниченный доступ Доступ для подписчиков

Исследование структуры и свойств упрочненных аддитивных изделий, полученных из электроэрозионного кобальтохромового порошка

Е. В. Агеев, Е. В. Агеева, А. Ю. Алтухов

Аннотация


Представлены результаты исследования структуры и свойств упрочненных аддитивных изделий, полученных из электроэрозионного кобальтохромового порошка. Показана высокая эффективность упрочнения аддитивных изделий из электроэрозионных порошков статико-импульсной обработкой для снижения негативного высокотемпературного воздействия аддитивной обработки на твердость и износостойкость изделий.

Ключевые слова


cobalt-chromium alloys; electroerosion refinement; powder; additive articles; hardening; structure; hardness; wear resistance

Полный текст:

PDF

Литература


Song B., Dong S., Zhang B. et al. Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V // Materials & Design. 2012. V. 35. Р. 120 - 125.

Song B., Dong S., Coddet P. et al. Fabrication and microstructure characterization of selective laser melted FeAl intermetallic parts // Surface and Coatings Technology. 2012. V. 206. Р. 4704 - 4709.

Wang Z., Guana K., Gaoa M. The microstructure and mechanical properties of deposited-IN718 by selective laser melting // Journal of Alloys and Compounds. 2012. V. 513. Р. 518 - 523.

Karlsson J., Snis A., Engqvist H., Lausmaa J. Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti - 6Al - 4V powder fractions // Journal of Materials Processing Technology. 2013. V. 213, No. 12. Р. 2109 - 2118.

Safdar A., Wei L. Y., Snis A., Lai Z. Evaluation of microstructural developmentin electron beam melted Ti - 6Al - 4V // Materials Characterization. 2012. V. 65. Р. 8 - 15.

Safdar A., He H. Z., Wei L. Y., Snis A. et al. Effect of process parameters settings and thickness on surface roughness of EBM produced Ti - 6Al - 4V // Rapid Prototyping Journal. 2012. V. 18, No. 5. P. 401 - 408.

Loeber L., Biamino S., Ackelid U. et al. Comparison of selective laser and electron beam melted titanium aluminides // Conference paper of 22nd International symposium "Solid freeform fabrication proceedings". University of Texas, Austin. 2011. Р. 547 - 556.

Biamino S., Penna A., Ackelid U. et al. Electron beam melting of Ti - 48Al - 2Cr - 2Nb alloy: microstructure and mechanical properties investigation // Intermetallics. 2011. V. 19. Р. 776 - 781.

Gu D. D., Meiners W., Wissenbach K., Poprawe R. Laser additive manufacturing of metallic components: materials, processes and mechanisms // International Materials Reviews. 2012. V. 57, No. 3. Р. 133 - 164.

Konovalov S., Gromov V., Panchenko I. Fatigue-induced evolution of AISI 310S steel microstructure after electron beam treatment // Materials. 2020. V. 13, No. 20. P. 1 - 13.

Geng Y., Konovalo S. V., Chen X. Research status and application of the high-entropy and traditional alloys fabricated via the laser cladding // Progress in Physics of Metals. 2020. V. 21, No. 1. P. 26 - 45.

Nevskii S., Sarychev V., Konovalov S. et al. Wave instability on the interface coating / substrate material under heterogeneous plasma flows // Journal of Materials Research and Technology. 2020. V. 9, No. 1. P. 539 - 550.

Chen X., Liu K., Guo W. et al. The fabrication of NiTi shape memory alloy by selective laser melting: a review // Rapid Prototyping Journal. 2019. V. 25, No. 8. P. 1421 - 1432.

Konovalov S., Osintsev K., Golubeva A. et al. Surface modification of Ti-based alloy by selective laser melting of Ni-based superalloy powder // Journal of Materials Research and Technology. 2020. V. 9, No. 4. P. 8796 - 8807.

Ageev E. V., Ageeva E. V. Properties of the coatings fabricated by plasma-jet hard-facing by dispersed mechanical engineering wastes // Russian Metallurgy (Metally). 2018. V. 2018, No. 6. P. 573 - 575.

Latypov R. A., Ageev E. V., Altukhov A. Y., Ageeva E. V. Manufacture of cobalt-chromium powders by the electric discharge dispersion of wastes and their investigation // Russian metallurgy (Metally). 2018. V. 2018, No. 12. P. 1177 - 1180.

Ageev E. V., Latypov R. A. Fabrication and investigation of carbide billets from powders prepared by electroerosive dispersion of tungsten-containing wastes // Russian Journal of Non-Ferrous Metals. 2014. V. 55, No. 6. P. 577 - 580.




DOI: https://doi.org/10.30906/mitom.2021.4.42-45


© Издательский дом «Фолиум», 1993–2021