Открытый доступ Открытый доступ  Ограниченный доступ Доступ для подписчиков

Моделирование кинетики образования выделений в сплаве Cu - 2 % Be

Мохсен Асади Асадабад, Роухоллах Махдави

Аннотация


Рассмотрена кинетика образования выделений в сплаве Cu - 2 % Be в терминах уравнений Аврами и Орована (Avrami and Orowan). Определена структура и твердость сплава после старения при 260 - 440 °C в течение от 15 мин до 10 ч. Рассчитана энергия активации выделений.

Ключевые слова


сплав Cu - 2 % Be; старение; кинетика; моделирование; энергия активации; Cu - 2% Be alloy; aging; kinetics; simulation; activation energy

Полный текст:

PDF

Литература


Wilkes P. Formation of Guinier-Preston zones in Cu - Be alloys // Acta Metallurgica. 1968. V. 16. P. 153 - 158.

Dieter G. A. Mechanical metallurgy Handbooks // Third Edition. 1976. No. 1. P. 120 - 121.

Behjati P., Dastjerdi H. V., Mahdavi R. Influence of ageing process on sound velocity in C17200 copper-beryllium alloy // Journal of Alloys and Compounds. 2010. P. 739 - 742.

Sakai T., Miora H., Muramatsu N. Effect of small amount addition of Co on dynamic recrystallization of Cu - Be alloys // Materials Transaction. JIM. 1995. V. 36, No. 8. P. 1023 - 1030.

Nourbakhsh S., Nutting J. The metallography of cuboid- shaped inclusions in commercial Cu - Be - Co alloy // Journal of Material Science. 1979. V. 14. P. 2642 - 2644.

Miki M., Ogino Y. Effects of Co, Ni and Ti additions on the cellular Precipitation in Cu - 2 % Be Alloys // Materials Transactions. 1994. V. 35, No. 3. P. 161 - 167.

Rioja R. J., Laughlin E. The Sequence of precipitation in Cu - 2 % Be alloys // Acta Metallurgica. 1979. V. 28. P. 1301 - 1313.

Djuric B., Jovanovic M. A study of precipitation in Cu - Be alloys // Journal of Metallography. 1980. V. 13. P. 235 - 247.

Koo Y. M., Cohen J. B. The structure of GP zones in Cu - 10.9 at.% Be // Acta Metallurgica. 1989. V. 37, No. 5. P. 1295 - 1306.

Yagmur L., Duygulu O., Aydemir B. Investigation of metastable γ' precipitate using HRTEM in aged Cu - Be alloy // Material Science & Engineering. 2011. V. 528. P. 4147 - 4151.

Phillips V. A., Tanner L. E. High resolution electron microscope observations on G.P. zones in an aged Cu - 1.97 wt.% Be crystal // Acta Metallurgica. 1973. V. 21. P. 441 - 448.

Bonfield W., Edwards B. C. Precipitation hardening in Cu - 1.81 wt% Be - 0.28 wt% Co // Journal of Materials Science. 1974. V. 9. P. 398 - 408.

Guoliang X., Qiangsong W., Xujun M., Lijun P. The precipitation behavior and strengthening of a Cu - 2.0 wt% Be alloy // Material Science & Engineering. 2012. P. 326 - 330.

Shiromizu R., Mishima Y. Reversion of metastable phase in Cu - Be alloy // Journal of Jap Inst. 1971. V. 35. P. 183.

Rocha J. G., Rioja R. J., Laughlin D. E. The gamma phase boundary of Cu - Be alloys // Metallurgical Transactions. 1984. V. 15A. P. 939 - 942.

Yagmur L. Effect of microstructure on internal friction and Young's modulus of aged Cu - Be alloy // Material science & Engineering. 2009. V. A523. P. 65 - 69.

Hong H. S., Kong M. S., Sung N. M. et al. An investigation of the properties of Cu - Be - x alloys prepared by horizontal continuous casting // Journal of Ceramic Processing Research. 2007. V. 8, No. 3. P. 164 - 166.

Ryou M., Lee B. S., Myung M., Kim H. Influence of aging treatment on the mechanical and electrical properties of Cu - 0.5 % Be alloy // Journal of Material Science Technology. 2008. V. 24. No. 1.

Jen K. P., Xu L., Hylinski S., Gildersleeve N. Over-aging effect on fracture toughness of beryllium copper alloy C17200 // ASM International. 2008. P. 714 - 724.

ASTM B194-03. Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar. American society for testing materials. Annual Book of ASTM Standards. V. 02.01. 2003.

Avrami M. Granulation, phase change and microstructure kinetics of phase change // Journal of Chemical Physics. 1941. V. 9. P. 177 - 184.

Wilson E. A. Quantification of age hardening in an Fe - 12Ni - 6Mn alloy // Scripta Mater. 1997. V. 36(10). P. 1179 - 1185.

Precipitation Hardening, 2st ed. / ed. by J. W. Martin. Pergamon Press: Oxford, 1998.

Sha W. Quantification of age hardening in maraging steels and an Ni-Base super alloy // Scripta Materials. 2000. V. 42. P. 549 - 553.

Pardal J. M., Tavares S. S. M., Terra V. F. et al. Modeling of precipitation hardening during the aging and over aging of 18Ni - Co - Mo - Ti maraging steel // Journal of Alloys and Compounds. 2005, V. 393. P. 109 - 113.

Varschavsky A., Donoso E. A differential scanning calorimetrie study of precipitation in Cu - 2Be // Thermochimica Acts. 1995. V. 266. P. 257 - 275.





© Издательский дом «Фолиум», 1993–2021