Открытый доступ Открытый доступ  Ограниченный доступ Платный доступ или доступ для подписчиков

Экспериментальное исследование возможности нитроцементации низкоуглеродистых сталей в газовой атмосфере на основе пропан-бутановой смеси

Олег Константинович Пирогов, Дмитрий Львович Мерсон

Аннотация


Экспериментально исследован процесс нитроцементации на примере низкоуглеродистой стали 08пс. Показана фактическая возможность применения пропан-бутановой смеси для создания газовой атмосферы CO – CO2 – С3Н8 – Н2 – Н2О – NH3 – N2 для проведения нитроцементации. Установлено, что при использовании такой смеси на стали формируется упрочненный слой с требуемыми толщиной и твердостью поверхности, такими же, как при нитроцементации в природном газе (метане).


Ключевые слова


поверхностное насыщение; газовая атмосфера; пропан-бутановая смесь; нитроцементация; природный газ (метан)

Полный текст:

PDF

Литература


Ekkard Brinksmeier, Thomas Lubben, Udo Fritsching et al. Distortion minimization of disks for gear manufacture // IJMTM. 2011. V. 51. P. 331 – 338. DOI: dx.doi.org/10.1016/ j.ijmachtools.2010.12.005

Vyazmina E. Carbonitriding: kinetic modeling of ammonia and acetylene decomposition at high temperature and low pressure // Matériaux et Techniques. 2018. V. 106, Is. 1. Art. 103. DOI: 10.1051/mattech/2018033

Skalecki M. G., Klümper-Westkamp H., Winter K.-M., Zoch H.-W. Controlled carbonitriding and simulation of carbonitriding process // HTM. 2020. V. 75. P. 105 – 120. DOI: 10.3139/105.110405

Kenta Tsujii. Development of a prediction method for carbonitrided surface carbon and nitrogen contants by computantional thermodynamics and validation by carbonitriding for pure iron // ISIJ Int. 2020. V. 60. P. 2051 – 2058. DOI: 10.2355/isijinternational. ISIJINT-2020-050

Tikhonov A. K. Chemicothermal treatment in large-scale production // Met. Sci. Heat Treat. 1996. V. 38. P. 16 – 19. DOI: 10.1007/BF01153866

Tikhonov A. K., Krishtal M. A. Intensification of carburizing (carbonitriding) in mass production // Met. Sci. Heat Treat 1991. V. 33. P. 455 – 459. DOI: 10.1007bf00775380

Лахтин Ю. М., Леонтьева В. П. Материаловедение. М.: Машиностроение, 1990. 528 с.

Marray T. A thermodinamic and experimental study of low-alloy steels after carbonitriding in a low-pressure atmosphere // Met. Sci. Heat Treat. 2014. V. 56. P. 434 – 439. DOI: 10.1007/ s11041-014-9777-y

Rakhit A. Heat treatment of gears: a practical guide for engineers. ASM International, 2000. 210 p.

Le Thi Chieu, Nguyen Duong Nam. The atmosphere constituents for gas carbonitriding anchorage wedge // J. Mech. Eng. Res. Dev. 2019. V. 42. P. 74 – 77. DOI: 10.26480/jmerd.05. 2019.74.77

Davis J. R. Surface hardening of steels understanding the basics. ASM International, 2002. 319 p.

Chunyan Nan, Derek O. Northwood et al. Study on the dimensional changes and residual stresses in carbonitrided and ferritic nitrocarburized SAE 1010 plain carbon steel // Mater. Sci. Forum. 2010. V. 638 – 642. P. 829 – 834. DOI: 10.4028/ www.scientific.net/MSF.638-642.829

Geshelin V. G., Polunin V. I., Akhant’ev V. P. Cyclic-loading strength of carbonitrided steels intended for machine parts under heavy load // Met. Sci. Heat Treat. 1994. V. 36. P. 8 – 13. DOI: doi.org/10.1007/BF01408594

Kanchanomai C., Limtrakarn W. Effect of residual stress on fatigue failure of carbonitrided low-carbon steel // JMEP. 2008. V. 17, Is. 6. P. 879 – 887. DOI: 10.1007/ s11665-008-9212-x

Krauss G. Steels: processing, structure, and performance. ASM International, 2015. 682 p.

Schott C., Zinn W., Scholtes B., Niendorf T. Bend straightening of a carbonitrided gear shaft — consequences on residual stresses and retained austenite near the surface // HTM. 2017. V. 72. P. 145 – 153. DOI: 10.3139/105.110320

Funatani K. Trends in automotive materials: state of steel and processing technologies and future tasks // International Heat Treatment and Surface Engineering. 2010. V. 4, Is. 3. P. 117 – 120. DOI: 10.1179/174951410X12646901266889

Korotkov V. A. Carbonitriding as a means of alleviating the wear of metallurgical equipment parts // Metallurgist. 2016. V. 59. P. 1215 – 1220. DOI: 10.1007/s11015-016-0240-8

Pye D. Practical nitriding and ferritic nitrocarburizing. ASM International, 2003. 257 p.

Campagna V., Bowers R., Northwood D. O. et al. Distortion and residual stresses in nitrocarburized and carbonitrided SAE 1010 plain carbon steel // SAE Int. J. Mater. Manu. 2008. V. 1, Is. 1. P. 690 – 696. DOI: 10.4271/2008-01-1421

Totten G. Handbook of Residual Stress and Deformation of Steel. ASM International, 2002. 500 p.

Campagna V., Bowers R., Northwood D. O. et al. Comparison of carbonitriding and nitrocarburising on size and shape distortion of plain carbon SAE 1010 steel // Surf. Eng. 2011. V. 27. P. 86 – 91. DOI: 10.1179/026708410X12687356948553




DOI: https://doi.org/10.30906/mitom.2026.6.22-26


© Издательский дом «Фолиум», 1998–2026