Открытый доступ
Платный доступ или доступ для подписчиков
Текстура сплава Inconel 718, полученного методом электронно-лучевого сплавления
Аннотация
Исследован жаропрочный никелевый сплав Inconel 718, полученный по аддитивной технологии методом электронно-лучевого сплавления. Проведен анализ текстуры аддитивных заготовок с использованием ориентационной микроскопии (EBSD). Установлено влияние технологических параметров электронно-лучевого сплавления на характеристики текстуры аддитивной заготовки из сплава Inconel 718.
Ключевые слова
Литература
Ajmal K. M., Yi R., Zhan Z. et al. Highly efficient smoothing of Inconel 718 via electrochemical-based isotropic etching polishing // Precision Engineering. 2021. V. 71. P. 119 – 129. DOI: 10.1016/j.precisioneng.2021.03.005
Kumar V. P., Jebaraj A. V. Influence of double aging heat treatment on phase transformation and dimensional accuracy of Inconel 718 alloy made through laser-based additive manufacturing // Trans. Indian Inst. Met. 2021. V. 74, Is. 12. P. 3103 – 3117. DOI: 10.1007/s12666-021-02374-8
Yong C. K., Gibbons G. J., Wong C. C., West G. A critical review of the material characteristics of additive manufactured IN718 for high-temperature application // Metals. 2020. V. 10, Is. 12. 1576. DOI: 10.3390/met10121576
Popov V. V., Lobanov M. L., Stepanov S. I. et al. Texturing and phase evolution in Ti – 6Al – 4V: Effect of electron beam melting process, powder re-using, and HIP treatment // Materials. 2021. V. 14. 4473. DOI: 10.3390/ma14164473
Wang X., Gong X., Chou K. Review on powder-bed laser additive manufacturing of Inconel 718 parts. Proceedings of the Institution of Mechanical Engineers, Part B // Journal of Engineering Manufacture. 2016. V. 231, Is. 11. P. 1890 – 1903. DOI: 10.1177/095440541561988
Sharman A., Hughes J., Ridgway K. Workpiece surface integrity and tool life issues when turning Inconel 718TM nickel-based superalloy // Mach. Sci. Technol. 2004. V. 8. P. 399 – 414.
Du J. H., Lu X. D., Deng Q. et al. High-temperature structure stability and mechanical properties of novel 718 superalloy // Mater. Sci. Eng. A. 2007. V. 452 – 453. P. 584 – 591.
Sun S. H., Hagihara K., Nakano T. Effect of scanning strategy on texture formation in Ni – 25 at.% Mo alloys fabricated by selective laser melting // Mater. Des. 2018. V. 140. P. 307 – 316. DOI: 10.1016/j.matdes.2017.11.060
Gokcekaya O., Ishimoto T., Hibino Sh. et al. Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy // Acta Mater. 2021. V. 212. 116876. DOI: 10.1016/j.actamat.2021.116876
Cazic I., Zollinger J., Mathieu S. et al. New insights into the origin of fine equiaxed microstructures in additively manufactured Inconel 718 // Scr. Mater. 2021. V. 195. 113740. DOI: 10.1016/j.scriptamat.2021.113740
Popovich V. A., Borisov E. V., Popovich A. A. et al. Functionally graded Inconel 718 processed by additive manufacturing: crystallographic texture, anisotropy of microstructure and mechanical properties // Mater. Des. 2017. V. 114. P. 441 – 449.
Körner C., Helmer H., Bauerei A., Singer R. F. Tailoring the grain structure of IN718 during selective electron beam melting // MATEC Web of Conf. 2014. V. 14. 08001.
Жиляков А. Ю., Пырин Д. В., Попкова Д. С. и др. Особенности структуры и разрушения сплава Inconel 718, изготовленного методом электронно-лучевого сплавления // МиТОМ. 2024. № 5(827). С. 48 – 55. DOI: 10.30906/ mitom.2024.5.48-55
Al-Juboori L. A., Niendorf T., Brenne F. On the tensile properties of Inconel 718 fabricated by EBM for as-built and heat-treated components // Metall. Mater. Trans. B. 2018. V. 49B. P. 2969 – 2974.
Brenne F., Probstle T. M., Neumeier S. et al. Microstructural design of Ni-base alloys for high-temperature applications: impact of heat treatment on microstructure and mechanical properties after selective laser melting // Prog. Addit. Manuf. 2016. V. 1. P. 141 – 151. DOI: 10.1007/s40964-016-0013-8
Nunez R. M., Pereira D., Clarke T., Hirsch T. K. Delta phase characterization in Inconel 718 alloys through x-ray diffraction // ISIJ Int. 2015. V. 55. P. 38 – 55. DOI: 10.2355/ isijinternational.ISIJINT-2015-111
DOI: https://doi.org/10.30906/mitom.2025.1.74-78
© Издательский дом «Фолиум», 1998–2026